Original
By certification 
CTS Downstream Magnetic Separator
CTS Downstream Magnetic Separator It is a cylinder type magnetic separator composed of Nd-Fe-B rare earth permanent magnet and downstream tank. It is suitable for wet separation of strong magnetic minerals with coarse particles or removal of mixed strong magnetic minerals in non-magnetic minerals. The machine can continuously feed and discharge ore, with large magnetic field depth, large working gap and strong processing capacity.
The principle of the machine is that when the pulp enters the magnetic field area, the strong magnetic minerals are adsorbed on the surface of the cylinder, the weak magnetic and non-magnetic minerals are thrown off and discharged, and the strong magnetic minerals adsorbed on the surface of the cylinder rotate with the cylinder skin, and are brought out of the magnetic field area, and washed into the concentrate tank with scraper flushing water to complete the separation operation.
Adopted standard: machinery industry standard permanent magnet cylinder magnetic separator, standard number:JB/T 7895-2008.
1. Type
(1) The magnetic system type of magnetic separator is divided into multi pole fan-shaped open composite magnetic system (generally 5 poles, 7 poles, 8 poles, 10 poles, 12 poles, etc.).
(2) The form of tank body is downstream type, which is indicated by "s", that is, CTS.
(3) The downstream magnetic separator is suitable for roughing of ores with particle size less than 3-10 mm.
2. Model
Examples of models are as follows:
3. Purpose
CTS series magnetic separators are wet separation equipment. It is generally applicable to the roughing of magnetite, pyrrhotite and magnetically roasted hematite, limonite and siderite, especially the pre magnetic separation in concentrator, with very good effect. It is also very suitable for iron separation from fly ash in power plant and from sand in sand field.
4. Characteristics
According to the characteristics of raw ore in different regions, such as the grade of raw ore and the particle size of crystallization, we have improved the magnetic pole number of magnetic system, magnetic field intensity and magnetic field absorption depth of drum surface, and the comprehensive matching of magnetic field gradient of multi-stage magnetic system of magnetic separators, greatly improving the quality of concentrate At the same time, the tank structure has been reformed to solve the problems of wear resistance and treatment capacity, increase the treatment capacity of single magnetic separator, and extend the service life. Especially for the coarse particles in the concentrator, the pre magnetic separation has a very good effect. The magnetic induction intensity of roller surface is generally required to be 400mt-500m,
The structure of transmission system is simple and easy to maintain (hard tooth surface reducer is adopted). The wear-resistant layer on the surface of stainless steel drum of magnetic separator includes wear-resistant rubber plate, wear-resistant ceramic plate, polyurethane plate, stainless steel and other forms. The service life of wear-resistant layer is related to the particle size of ore and daily working time. Users can choose.
According to the different requirements of users for magnetic induction intensity on the drum surface of magnetic separators, our company can produce magnetic separators with various magnetic field intensities from 120mt to 500mt. Our company can also recommend the use of magnetic separators with different magnetic separation stages for users' reference. With many years of production experience, it is generally unnecessary to recover tailings after concentrate separation with our magnetic separators.
Specifications and main technical parameters of CTS series downstream magnetic separators
model |
Specifications |
roller speed RPM |
Average magnetic induction (mT) |
work Clearance ㎜ |
Feed concentration％ |
handle ability Ton / set h |
electric machinery powerKW |
External dimension Length × width × height㎜ |
Total weight of equipment ㎏ |
|
|
roller diameter㎜ |
roller length㎜ |
|||||||||
CTS-710 |
750 |
1000 |
33.7 |
300-500 |
≤40 |
15-30 |
10-25 |
3 |
2120×1220×1420 |
1390 |
CTS-712 |
750 |
1200 |
33.7 |
≤40 |
15-30 |
15-30 |
3 |
2320×1220×1420 |
1550 |
|
CTS-718 |
750 |
1800 |
33.7 |
≤40 |
15-30 |
20-45 |
4 |
2920×1220×1420 |
1850 |
|
CTS-918 |
900 |
1800 |
28.5 |
≤50 |
15-30 |
25-55 |
4 |
2995×1490×1480 |
2900 |
|
CTS-921 |
900 |
2100 |
25.5 |
≤50 |
15-30 |
30-60 |
4 |
3295×1490×1480 |
3100 |
|
CTS-924 |
900 |
2400 |
25.5 |
≤50 |
15-30 |
35-70 |
4 |
3595×1490×1480 |
3560 |
|
CTS-1015 |
1050 |
1500 |
21.5 |
≤50 |
15-30 |
35-70 |
5.5 |
2820×1710×1750 |
3500 |
|
CTS-1018 |
1050 |
1800 |
21.5 |
≤50 |
15-30 |
40-75 |
5.5 |
3120×1710×1750 |
4050 |
|
CTS-1021 |
1050 |
2100 |
21.5 |
≤50 |
15-30 |
45-88 |
5.5 |
3420×1710×1750 |
4450 |
|
CTS-1024 |
1050 |
2400 |
21.5 |
≤50 |
15-30 |
52-100 |
5.5 |
3720×1710×1750 |
5050 |
|
CTS-1030 |
1050 |
3000 |
21.5 |
≤50 |
15-30 |
65-125 |
7.5 |
4320×1710×1750 |
6250 |
|
CTS-1218 |
1200 |
1800 |
19 |
≤60 |
15-30 |
47-90 |
5.5 |
3250×1950×1800 |
5800 |
|
CTS-1224 |
1200 |
2400 |
19 |
≤60 |
15-30 |
82-120 |
7.5 |
3850×1950×1800 |
6200 |
|
CTS-1230 |
1200 |
3000 |
19 |
≤60 |
15-30 |
80-150 |
7.5 |
4450×1950×1800 |
7200 |
|
CTS-1540 |
1500 |
4000 |
14 |
≤60 |
15-30 |
115-220 |
11 |
5500×2430×2370 |
9300 |
|
Note: 1. The average magnetic induction intensity of CTS magnetic separator drum surface is generally determined according to the content of magnetic iron in the ore. if users need special specifications of magnetic separators, our factory will design and manufacture them according to the actual needs, but we need to specify the technical requirements or attach the technical agreement when ordering.
2. This type of magnetic separator is right type if the user does not put forward special requirements.
http://www.xgmagneticseparator.com/
