Original
By certification 
The lifting gantry is divided into winch lifting gantry and turbine lifting gantry.
The height of the winch lifting gantry can be adjusted by gears, and the pin shaft is loaded with a variety of places. Equipped with a self-locking winch or a turbine winch, the lifting is more convenient. The lifting adopts a sliding sleeve design. The steel wire rope is equipped with a guide pulley to lift the inner core of the column and drive the main beam to lift. The height of the turbine lifting gantry can be adjusted arbitrarily, the lead screw is loaded, and the use site is diversified. Lifting is more convenient. The lifting adopts sliding sleeve design, worm gear and worm drive, so as to lift the inner core of the column, and then drive the main beam to lift. The height of the gantry crane can be adjusted slightly, the use of the site is wider, the worm gear lifting design is more reasonable, and the use is safer.
The steel plate adopts laser cutting, smooth cut, fully detachable design, convenient transportation, simple installation, flange butt joint, 8.8 high-strength bolt connection
Gantry crane can reach the maximum lifting height with the lowest body height.
Model |
PT2-1 |
||||||
Type |
Adjustable height by hand winch |
||||||
Capacity(ton) |
0.5ton |
1ton |
2ton |
3ton |
5ton |
7.5ton |
10ton |
Span(m) |
2-12m or as you require |
||||||
Height(m) |
1-10m or as you require |
||||||
Lifting hoist |
Manual hoist/Electric chain hoist/CD wire rope hoist |
||||||
Power |
380V 50Hz 3phase or as you require |
||||||
Certification |
CE |
||||||
Application area |
Model manufacturer and installing situation, automobile factories, producing department, workshop, warehouse, smallequipment installation |
||||||
http://www.jcs-hoisting.com/
